optoway spm-9100vw-1tg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 v1.0 1 spm-9100vw-1tg (rohs compliant) 850 nm / 3 gb/s single optical multi-mode digital diagnostic transmitter ********************************************************************************************************************************************************************** features l smpte 297-2006 compatible l speed from 50 mbps to 3gbps with up to 1000 m multi-mode fiber l distance up to 300 m for 3g-sdi l support video pathological patterns for sd-sdi, hd-sdi and 3g-sdi l single transmitter with simplex lc l based on industry standard sfp l sff-8472 digital diagnostic function l ttl laser disable input l single +3.3 v power supply l rohs-6 compliant l 0 to 70 o c operation l hot pluggable l class 1 laser international safety standard iec-60825 compliant applications l smpte 297-2006 compliant electrical-to-optical interfaces l high-density video routers description the spm-9100vw-1tg is a single channel optical multi- mode transmitter module designed to transmit optical serial digital signals as defined in smpte 297-2006. it supports from 50 mbps to 3 gbps and is specifically designed for transmitted the smpte 259m, smpte 344m, smpte 292m and smpte 424m sdi pathological patterns. it is with the sfp 20-pin connector to allow hot plug capability. digital diagnostic functions are available via an i 2 c. it is with 850 nm vcsel transmitters. the transmitter can transmit signal from 50 mbps to 3 gbps with up to 1000 m of multi-mode fiber when using the SPM-9100VW-1RG/2rg as the receiver. a maximum distance of 300 m is achievable with 3gbps pathological signals. laser safety this multi-mode transceiver is a class 1 laser product. it complies with iec-60825 and fda 21 cfr 1040.10 and 1040.11. the transceiver must be operated within the specified temperature and voltage limits. the optical ports of the module shall be terminated with an optical connector or with a dust plug. order information tx1 tx2 p/no. type bit rate (mb/s) (nm) power (dbm) (nm) power (dbm) package temp ( o c) rohs compliant spm-9100vw-1tg 1-tx 50 to 3000 850 -2 to -7 lc sfp with dmi 0 to 70 yes related products rx1 rx2 p/no. type bit rate (mb/s) (nm) sen. (dbm) (nm) sen. (dbm) package temp ( o c) rohs compliant SPM-9100VW-1RG 1-rx 50 to 3000 850 0 to -15 lc sfp with dmi 0 to 70 yes link distance transmitter receiver sdi bit rate max. link distance (m) 3g-sdi 2.97gbps 300 hd-sdi 1.485gbps 500 spm-9100vw-1tg SPM-9100VW-1RG sd-sdi 270mbos 1,000
optoway spm-9100vw-1tg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 v1.0 2 absolute maximum ratings exposure to absolute maximum rating conditions for extended periods may affect device reliability. absolute maximum ratings parameter symbol min max units notes storage temperature tstg -40 85 o c operating case temperature tc 0 70 o c power supply voltage vcc 0 4 v esd tolerance on all pins 1 kv hbm relative humidity --- 5 95 % rh non-condensing recommended operating conditions parameter symbol min typ max units / notes power supply voltage vcc 3.13 3.3 3.47 v operating case temperature tc 0 70 o c baud rate 50 3000 mb/s power supply current icc 130 180 ma transmitter specifications (0 o c < tc < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes optical optical transmit power po -7 -2 dbm 1 output center wavelength l 830 850 870 nm at 25 o c output spectrum width dl --- 1 nm rms ( ) extinction ratio er 5 7.5 db relative intensity noise rin -118 db/hz 135 ps 2, smpte 424m 270 ps 2, smpte 292m 800 ps 2, smpte 344m optical rise time / fall time tr / tf 1.5 ns 2, smpte 259m electrical differential input voltage v ih - v il 200 1200 mvp-p ac coupled input disable input voltage -- low v tdis,l 0 0.8 v tx output enabled disable input voltage -- high v tdis,h 2.0 vcc+0.3 v tx ouput disabled v oh 2.5 vcc+0.3 v scl, sda v ol 0 0.5 v 1. output power is power coupled into a 62.5/125 m m multi-mode fiber. 2. 20% to 80%, unfiltered. module definition module definition pin 5 pin 6 interpretation by host 4 scl sda serial module definition protocol module definition 4 specifies a serial definition protocol. for this definition, upon power up, scl and sda appear as no connector (nc). when the host system detects this condition, it activates the serial protocol. the protocol uses the 2-wire serial cmos e 2 prom protocol of the atmel at24c01a/02/04 family of components.
optoway spm-9100vw-1tg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 v1.0 3 connection diagram pin name function notes 1 vee signal ground 2 nc no connection 3 nc no connection 4 vee signal ground 5 scl serial i 2 c clock 6 sda serial i 2 c data 7 vee signal ground 8 nc no connection 9 nc no connection 10 nc no connection 11 vee signal ground 12 nc no connection 13 nc no connection 14 vee signal ground 15 nc no connection 16 vcc tx power supply +3.3v 5%, internal connected 17 vee signal ground 18 tx+ positive transmitter data in 19 tx- negative transmitter data in ac coupled differential lines with 100 ohm differential termination inside the module 20 tx_dis transmitter disable internal 4.7 k pull-up. the bias current and modulation current are turned off if tx1_dis = high.
optoway spm-9100vw-1tg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 v1.0 4 recommended circuit schematic 100nf vee 100 differential tx - tx + vcc_tx nc nc nc nc tx_dis 20 18 19 16 15 8 9 17 vcc 3.3v 10 nc tx_dis scl sda 10k 5 6 nc nc nc vee vee nc vee vee 14 2 4 1 12 3 11 7 13 10uf 1uh 10k td + td - re-clocker i2c data i2c clk vcc 3.3v 100nf 10uf 1. consult the chipset manufacturer s applications information for biasing required for tx outputs. some chipset outputs are internally biased and may not need external bias resistor. package diagram ( units in mm) note: since the spm-9100vw-1tg is single channel device, the receptacle for channel 2 is not used.
optoway spm-9100vw-1tg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 v1.0 5 revision history version subject release date 1.0 initial datasheet 2008/11/1
|
